1st Garage Door Openers

Genie Garage Door Openers Intellicode, OverHead Door Garage Door Openers CodeDodger

 LiftMaster Garage Door Openers, Chamberlain, Sears, Craftsman, Garage Master, Access Master

Linear DTD Garage Door Opener, MegaCode, Delta 3, Moore-O-Matic

Multi-Code Garage Remote Controls 3089

Allstar Garage Door Openers, Allister, Pulsar, MVP, Challenger, GTO, All-O-Matic

Garage Door Openers from Keystone, Heddolf, Crusader, ESP Micom

Wayne Dalton Garage Door Openers, iDrive, DoorMAster, Quantum, Classic Drive

Tec-Key Garage Door Opener Remote Control Transmitters

STANLEY

MARANTEC

TriCode®

ALLISTER

RAYNOR

Garage Door Opener Remote Control Transmitters, Tec-Key 2000

OPTEX

TELECTRON

UNIVERSAL

"SOLUTIONS TO YOUR GARAGE DOOR OPENERS UPS AND DOWNS"
FOR SALES
CALL
 1-
480-247-2094
ALL ORDERS ARE
SHIPPED SAME OR
NEXT DAY!!!
VISA, MASTERCARD,
AMERICAN EXPRESS
DISCOVER and PAY PAL
HOME

CONTACT US

Garage Door Openers, Genie Garage Door Openers, Alliance, Blue Max, Genie Pro, Phantom, CodeDodger

1st Garage Door Openers, Inc. BBB Business Review

   
  Alliance  
 
Norelco  
 
Blue Max  
 
Lift-A-Door  
 
Pro Max  
 
Hercules  
 
Stealth  
 
Excelerator  
 
Intellicode  
 
Genie Pro  
 
OverDrive  
 
Python  
 
Signature  
 
Phantom  
 
Legacy  
 
Medallion  
 
CodeDodger  
 
Overhead Door  
 
Genie Shop Vacs  
Garage Door Openers, LiftMaster, Chamberlain, Sears, Craftsman, Garage Master, Access Mster
  Chamberlain
  Sears  
  Craftsman
  Garage Master
  Access Master
  Master Mechanic
  Security +  
  Estate Series
  Formula I  
  Whisper Drive
  Power Drive
  Billion Code
  TriCode®
STANLEY
  Vemco  
 
Quiet Glide  
 
SecureCode  
 
Lightmaker  
 
Innovate Home Products  
 
Whistler  
 
U-Install  
 
Popular Mechanics  
Garage Door Openers, Allstar, Allister, Pulsar, MVP, Challenger, GTO, All-O-Matic
  Allstar  
 
Allister  
 
Pulsar  
 
MVP  
 
Challenger  
 
GTO  
 
All-O-Matic  
Garage Door Openers, Linear Access, AccessPro, MegaCode, Delta 3, Moore-O-Matic
  AM/II  
 
AccessPro  
 
Moore-O-Matic  
 
MegaCode  
 
Delta 3  
Garage Door Opener Remote Control Transmitters, Tec-Key 2000
  TK1020
  TK1010
Garage Door Openers, Multi-Code, 3089, Door Opener and Gate Operator Remote Controls
  3089      4120
  4140      3060
  3070      4200
Garage Door Openers from Keystone, Heddolf, Crusader, ESP Micom
  ESP Micom  
 
Intercontinental Dynamics  
 
Over Head Door  
  Heddolf,
Crusader
Garage Door Openers, Wayne Dalton, iDrive, DoorMAster, Quantum, Classic Drive
  Classic Drive

  iDrive  

  DoorMaster
  Quantum
  prodrive

MARANTEC

  M-Line
  Q-Line

RAYNOR

  R-169 
  R-170  

TELECTRON

  R204AD-RF225
  T80G-RF225
  NFR204AD-RF433.9
  NFT80G-RF433.9
  365LM
UNIVERSAL
  Home & Business Security
ACCESSORIES
  For Home, Garage or Car
  Always be prepared!
Driveway Alert no more missed visitors or deliveries! Indoor or outdoor use.
CUSTOMER ASSISTANCE
ABOUT US
SHIPPING / RETURNS
CANCELLATION POLICY
WARRANTY INFO
FAX or CHECK ORDERING
SITE INDEX
All orders are shipped same or next day!!!
USPS Priority Mail 2-4 Business Days
VISA, Mastercard, American Express and Discover

 

Review www.1stdooropeners.com on alexa.com

Official PayPal Seal

AllStar

WIRELESS DIGITAL PROGRAMMABLE KEYPAD

Model 104078

PRODUCT FEATURES

The Wireless Digital Programmable Keypad is a high quality, state of the art product with programming capabilities for four separate entrances. We believe this to be the finest product available anywhere and fully expect that you will receive many years of excellent service from your new keypad. Because of the programmable nature of your new keypad it is important to follow the programming instructions carefully. While they may seem a little complex at first, if you read these instructions carefully with your keypad close by, you should have little problem setting your new system.

NOTE:  If your current remote or receiver has 2-position (Binary) coding switches and 318mhz frequency, use these instructions in conjunction with the main coding instructions below.

1.  Any switches in the OFF position will be coded as "0".

2.  If switches 1 thru 4 are in the ON or UP position, Code as "+".

3.  If switches 5 thru 9 are in the ON or UP position, Code as "-".

 

TERMS USED IN THIS MANUAL:

PIN: Is the Personal Identification Number you choose which will allow you to operate your door or gate controls. The Primary PIN is the PIN you choose and program the keypad with to operate the door or gate. After programming, The Primary PIN becomes the only number, which can be used to re-program your system. It is insurance against anyone else re-programming your system.

Factory Default: Refers to settings on your keypad, which were made at the factory.

LED: Light Emitting Diode, or indicator light on your keypad.

FEATURES OF YOUR NEW KEYPAD:

The Keypad has a number of operating features and indicators to provide you with information and make its overall use easier.

Factory Default Setting: Should you ever forget your PIN you can restore your keypad to the original factory default settings. Once you do this, however, you must go through the programming steps again. To restore the factory setting, PUSH 999, PUSH #, PUSH 999,PUSH #. All codes are now restored to the original factory settings.

Reset/On-Off Switch: This switch turns the keypad and light system on allowing you to operate the system as well as to see the keys in the dark. The keypad will remain lit for 20 seconds after the last key is pressed. This key is also used to cancel the programming process.

Key Press Indicator: This green LED will light whenever a key is pressed indicating a valid key entry.

Signal Sent Indicator: This red LED will light whenever a valid PIN is entered indicating that a radio signal was sent to your garage door or gate operator.

Incorrect Entry Indicator: Should you ever enter an incorrect PIN both red and green LED’s will light simultaneously indicating an entry error. If this should occur please reset the system and enter a valid PIN.

Single Button Mode: Once you have entered a valid PIN and your door or gate operator begins to function, the number and letter keys remain active for 20 seconds. Pressing any one of these keys will send another signal to your operator, thus allowing you maximum control over your system. Depending on the operator, each signal you send can cause your operator to either stop or reverse direction. Please see the operating instructions that came with your operator to determine how your operator will react to these inputs.

Low Battery Indicator: the lighting for your keypad also serves as a low battery indicator. Should your keypad lights flash on and off it is an indication that your battery should be changes. If your battery does need to be replaced, simply open the hatch on the lower right side of your unit by sliding it forward, and remove the battery. Replace the battery with a standard 9-volt transistor battery and replace the hatch.

Non-Volatile Memory: Because your new programmable keypad uses non-volatile memory it is not necessary to reprogram you unit should your battery fail. Just replace the battery with a new one and your keypad is ready to operate again.

INSTALLATION INSTRUCTIONS

WARNING! Disconnect power to the operator before and during installation of this accessory. Do not reconnect power to operator until instructed to do so. Ensure doorway is clear before starting testing of unit.

STEP1: Choose a convenient location that does not interfere with the normal opening and closing operation of your door or gate, such as on the door jamb or on the outside wall adjacent to the door jamb. Please keep in mind that some doors will swing outward in their travel, and could damage an improperly located keypad. Try your door first to ensure there is no possibility of interference.

MOUNT YOUR KEYPAD A MINIMUM OF 5 FEET ABOVE THE GROUND TO KEEP IT OUT OF REACH OF CHILDREN.

STEP 2: Choose your mounting hardware. The screws provided are adequate for mounting your keypad directly into wood or similar material.

STEP 3: Drill a 3/32-inch pilot hole to a depth of 1-1/2 inches for the bottom mounting screw. Insert the screw into the pilot hole leaving the head of the screw exposed approximately 1/8 inch from the wall. Slide the keypad over the exposed screw and position the unit vertically. While held vertically mark the position of the top hole on the wall. Remove the keypad and drill another 3/32-inch pilot hole to a depth of ¾ inches. Slip the keypad over the bottom screw and insert the top screw.

PROGRAMMING INSTRUCTIONS:

The keypad requires you to set two specific security codes. The Transmitter Code is necessary for your keypad to communicate with the receiver unit, which is mounted on or in your garage door or gate operator. The second code is your Personal Identification Number (PIN), which allows you to activate the system. Your PIN should be guarded carefully as it is your assurance against unauthorized use of the system. The factory default PIN is 1,2,3,4 and your unit is set to this code when you first receive it.

If you look at your keypad you will notice that there are twelve keys, 1 to 3 and 0 plus two specially marked keys * and #. Most of the keys also have letters printed on them to allow you to set a personal keyword instead of a PIN.

Follow the directions below first to program the Transmitter Code.

PROGRAMMING THE TRANSMITTER CODE

Single Button Transmitter

If your gate or door operator currently has a single button transmitter:

STEP1: Locate your transmitter and open the coding hatch. You will see a coding switch block with numbers from 1 to 9. The possible setting for each switch is either “=”, “0” or “-“. Translate these settings into a numeric code.

+ = 1         0 = 2            - = 3

STEP 2: Copy the transmitter code as it is currently set into the table below.

Write the setting of your transmitter DIP switches into the Transmitter Code table.

Factory Default Setting

 

               1

  

                  

               2

          

             

                 3

           

                 4

Your Transmitter Code Setting

 

 

 

 

 

 

 

 

 

 

 

STEP 3: Now program your keypad:

  1. Press the ON/Reset button.
  2. Enter the Factory default PIN, 1,2,3,4
  3. Press key #
  4. Press key #
  5. Press key 1
  6. Enter the Transmitter Code you filled in above
  7. Press key#

The Transmitter Code is now programmed into your Keypad.

Dual or Triple Button Transmitter

If your gate or door operator has a two or three button transmitter:

STEP 1: Locate your transmitter and open the coding hatch. You will see a coding switch block with numbers from 1 to 8. The possible setting for each switch is either “+”, “0” or “-“. Translate these settings into a numeric code:

+ = 1                  0 = 2               - = 3

STEP 2: Copy the transmitter code as it is currently set into the table below.

Write the settings of your transmitter DIP switches into the Transmitter Code table.

Note the “Transmitter Button Code” box in the table below. You must also program the code for the specific transmitter button that you will use to open the gate or door. On a two- button transmitter, the left button code is 1, and right button code 2. On a three- button transmitter the left button code is 1, the middle button code is 2, and the right button code is 3. If you are programming the keypad so that the left transmitter button opens the gate or door, you will enter a 1 in the “Transmitter Button Code” box below.

Factory Default Codes

 

           1

 

 

              2

 

                  

          3

     

          4

Your Transmitter Code

 

 

 

 

 

 

 

 

Transmitter     Button Code

STEP 3: Now program your keypad:

  1. Press the ON/Reset button.
  2. Enter the Factory Default PIN 1,2,3,4
  3. Press key #
  4. Press key #
  5. Press key 1
  6. Enter the Transmitter Code you filled in above
  7. Enter the Transmitter Button Code you filled in above
  8. Press key #

The Transmitter Code is now programmed into your keypad.

PROGRAMMING INSTRUCTIONS

Factory Default Pin

 

 

 

 

 

 

Pin No. 1

NEW PIN

 

 

 

 

 

 

Repeat New Pin

 

 

 

 

 

 

PROGRAMMING YOUR PIN

It is now time to change the factory default PIN of 1,2,3,4 to your own private PIN.

STEP 1: Begin by filling out the table above.

You may program up to four PIN Codes. The PIN No. Entry represents the first, second, third and fourth PIN you are choosing to program. In the table above, PIN No. 1 represents the required entry for programming the first PIN you have selected. This first PIN will be your Primary PIN.

NOTE: DO NOT REVEAL YOUR PRIMARY PIN CODE. IT IS THE ONLY NUMBER WHICH CAN BE USED FOR PROGRAMMING AND IS YOUR INSURANCE AGAINST ANYONE REPROGRAMMING YOUR KEYPAD.

STEP 2: Press the ON/RESET button and enter all of the characters in the sequence shown in the table above.

STEP 3: Check your new setting by entering your new PIN Code, followed by * and the number of the door you wish to activate. The operator should respond. If not, repeat steps 5 and 6 again. Press the RESET/ON button should you press an incorrect key, and begin programming again.

OPERATING INSTRUCTIONS

To operate your new wireless keypad press the RESET/ON key to light or reset your keypad. Enter your PIN followed by the * symbol and then your door number.

Your operator should be activated. If not, try again, making certain you are entering the correct PIN.

If your operator is still not activated, a programming error may have been made. Repeat the programming steps outlined in the Programming Instructions section of this manual.

 

1stdooropeners.com - Owned by 1st Garage Door Openers, Inc., an independent family owned and operated business serving the Garage Door and Garage Door Opener Industry since 1981.  Providing excellent customer service and assistance for over 25 years. We are a discount reseller of  garage door opener remotes, repair parts, keyless entry and gate operator controls for your home, business, or gated community.   We carry parts for the following garage door openers Lift-Master, Chamberlain, Sears Craftsman, Access Master, Sears Best Craftsman, Sears Automatic Door Opener, Master Mechanic, Security +, Formula 1, Garage Master, Billion Code, LiftMaster Professional, Estate Series, Premium Series, Contractor Series, Power Driver, Whisper Drive, Genie, Alliance, Norelco, Blue-Max, Lift-A-Door, Pro Max, Hercules, Stealth, Excelerator, Intellicode, Genie Pro, OverDrive, Python 2, Signature, Phantom, Legacy, Medallion, CodeDodger, Overhead Door, Genie Shop Vac, Stanley, Vemco, Quiet Glide, SecureCode, Lightmaker, Innovative Products, Whistler, U-Install, Popular Mechanics, Allister, Allstar, Pulsar, MVP, Challenger, GTO, All-O-Matic, Electrolift, Westinghouse, AM/11, Linear, Access Pro, Moore-O-Matic, MegaCode, Delta 3, MultiCode, Heddolf, ESP Micom, Intercontinental Dynamics, Crusader, Wayne Dalton, iDrive, Door Master, Quantum, Classic Drive, Tec Key, Martec, Monarch, Telectron and other garage door openers, and gate operators. Brand names of Garage Door openers are registered trade names of the respective entities and are only used for reference.

1st Garage Door Openers Inc.

Mesa, AZ

1-480-247-2094

1-480-247-3498   Fax

Technical Support  Contact Us

www.1stdooropeners.com

 
FREE TECH HELP

Ask Kevin

Garage Door Openers Tech Help Ask Kevin

   
                
 

Copyright © 2017 All Rights Reserved. No part of this site can be reproduced in any form or by any means, photocopying, electronic, mechanical, or otherwise, without the prior written permission of 1st Garage Door Openers Inc.