|
| |
MULTI-CODE GARAGE DOOR OPENER RECEIVERS
The receivers listed in this index are the Multi-Code garage door opener receivers manufactured by Linear. Simply match up the
model number with the receivers listed below. If you are still unsure please
Contact Us.
Remote
control transmitters, Keyless entry systems,
Receivers
|
300 MHz
Frequency Radio Controls |
|
Multi-Code Garage Door Opener Receiver 1090 |
Multi-Code One Button Garage Door Opener Remote Control 3089 |
|
 |
 |
|
1090 |
3089 |
|
$32.95 |
$17.50 |
|
|
|
Multi-Code
Receiver 300 MHz frequency.
10 switch code settings.
Universal receiver will work on any door and gate opener
with three-terminal 24volt operator.
11" wire antenna included.
Dimensions 3" x 5 1/2" x 1 1/2 inches.
Three tabs for universal operator mounting.
Connection to any three-terminal 24volt operator.
No need for separate transformer or adapter.
|
1-Button Garage Door
Opener Remote Control Transmitter.
300
MHZ frequency.
10 switch code setting.
Compatible with all Multi-Code gate and garage door opener receivers.
Dimensions 3 3/4" x 2 1/2" x 3/4 inches.
Battery, visor clip and instructions included.
Compatible Keyless Entry System. |
|
|
| |
|
Multi-Code Garage Door and Gate Opener Receiver 1099-50 |
|
 |
|
1099-50 |
|
$42.95 |
|
|
-
Gate and garage door opener receiver.
-
Operates at 12 - 24 Volts AC or 10.5 - 30 Volts DC.
-
Will operate one device, 10 dip switches, single channel.
-
Works with Multi-Code 300 MHz or Stanley 310 MHz remotes, but not both at
the same time.
-
300 or 310 MHz jumper-selectable frequency adjustment.
-
Replaces 1099-30 or 1090CX receivers.
-
Includes 9.5" whip antenna, 3 feet of 75 ohm coaxial cable (for longer
range), bulkhead connector, mounting hardware, and complete installation
instructions.
|
| |
|
| |
|
Multi-Code Two Channel 12-24V Gate Receiver
MC302850 |
|
 |
|
MC302850 |
|
$55.00 |
|
|
- Operates on 12-24 volts AC or DC power
- Two cannel 512 codes set by dip
switches.
- Whip antenna
-
Works with Multi-Code 300 MHz or Stanley 310 MHz remotes, but not both at
the same time.
-
300 or 310 MHz jumper-selectable frequency adjustment.
- Dimensions: 3.625" W x 5.25" H x 1.5"
D
-
Includes 9.5" whip antenna, 3 feet of 75 ohm coaxial cable (for longer
range), mounting hardware, and complete installation
instructions.
|
|
|
|
|
|
