|
LiftMaster Chamberlain Sears
Craftsman Garage Door Openers
SAFETY SENSOR
REPAIR PARTS
|
|
|
|
41A5034
LiftMaster Chamberlain Sears Craftsman Garage Door Opener Safety
Sensors |
|
|
|
|
- Compatible with LiftMaster and
Chamberlain Brand garage
door openers 1997 thru current.
- Includes sensors only -
no brackets. Use 41A5266-1 below.
- One green light and one yellow
light.
- Each sensor shown has
approximately 18" of wire attached. Designed to splice into
your existing wires. Wire connectors included.
- Fits 41A5266-1 brackets pictured
below.
- Will NOT fit brackets
that the 41A4373A Sensors use.
|
|
41A5266-1
LiftMaster
Chamberlain Sears Craftsman Garage Door Opener
Safety Sensor Brackets for 41A5034 Sensors |
|
|
- Compatible with LiftMaster and
Chamberlain
Brand garage door openers 1997 thru current.
- FOR use with 41A5034 style
sensors ONLY.
- Older part number 51A5266-3.
|
|
|
|
|
41A5281 Liftmaster Chamberlain Sears
Craftsman Garage Door Opener Extension Brackets for 41A5266-1 Brackets
|
|
|
- Allows for flexibility in installation of 41A5266-1
brackets above.
|
|
|
|
|
41A4373A Liftmaster Chamberlain Sears
Craftsman Garage Door Opener
Safety Sensors
|
|
|
Discontinued -
see replacement options below |
|
|
- Compatible with LiftMaster and
Chamberlain Brand garage door openers 1993 thru 1997.
-
Includes
sensors only - no brackets. Use 41A6569 brackets.
- Each sensor has a green LED light
and a bolt hole that runs right through the center of it.
- Each sensor shown includes
approximately 18" of wire attached. Designed to splice into your
existing wires. Wire connectors included.
| |
|
Replacement
Safety Sensors with Brackets
41A4363A/41A5034 |
|
Garage Door Opener Infrared Safety System
CR2149 |
|
|
 |
OR
|
 |
|
|
41A4373A/41A5034 |
|
CR2149 |
|
|
$54.95 |
|
$43.50 |
|
|
|
|
|
|
- One green light and one yellow
light.
- Each sensor shown has
approximately 18" of wire attached. Designed to splice into
your existing wires. Wire connectors, 41A5266-1 brackets and
installation instructions included.
- Compatible with LiftMaster and
Chamberlain Brand garage door openers 1993 thru 1997.
|
|
- Compatible with all LiftMaster,
Chamberlain, Sears Craftsman
garage door openers from 1993 – to current that are equipped with safety sensors.
- Includes mounting brackets, fasteners, and
installation instructions.
- No wire included.
|
|
|
|
|
|
|
41A5281 Liftmaster Chamberlain Sears
Craftsman Garage Door Opener Extension Brackets for 41A5266-1 Brackets
|
|
|
- Allows for flexibility in installation of 41A5266-1
brackets above.
|
|
|
| |
|
WIRE 2 Conductor |
Insulated
Staples |
|
|
 |
 |
|
|
35265B |
34545R |
|
|
$12.95 |
$4.00 |
|
|
|
|
|
- 90' spool, 2 conductor wire for
damaged wire repair.
- For use with wall buttons or
safety sensors.
|
- 30 insulated staples with 2
screws.
- Used for mounting wall button
and safety sensors wiring.
|
|
|
|
|
|
|
Garage Door
Opener Woods Surge Protector 041000 |
|
|
|
|
|
|
|
|
41B873 LiftMaster
Chamberlain Sears Craftsman Garage Door Opener Safety Sensor Sun
Shields |
|
|
- LiftMaster, Chamberlain, Sears
Craftsman, and Chamberlain
brand garage door opener safety sensor sun shields.
- These safety sensor sun shields
are used to prevent sunlight from shining into sensor causing
accidental reversal of garage door.
- ONLY compatible
with 41A5266-1 safety sensor brackets pictured above.
- Includes one pair.
|
|
|
|
|
CPS-U LiftMaster
Commercial Door Operator Protector System |
|
|
- For use with models CPS, CPSll, CPS-L
and CPS-U.
- Direct connect commercial
protector system for Logic Control.
- Provides protection for doors up
to 30ft. wide.
- For use with the Logic Control
Board Version 2, 3, or 4.
- If using multiple sets of photo
eyes on one Logic operator, use CPS-U for lowest position and CPS
for every other position.
- For use on LiftMaster commercial
door operators only.
- Includes emitter, receiver,
mounting brackets, "C" wrap, wire, necessary hardware, and
installation manual.
|
|
|
|
|
LiftMaster
Commercial Door Operator Protector System |
|
|
- Commercial Protector System
provides protection on doors up to 30 feet wide.
- For use on LiftMaster commercial
door operators only.
- Provides protection for doors up
to 30ft. wide.
- Includes emitter, receiver,
mounting brackets, "C" wrap, wire, fasteners,
and installation instructions.
|
|
|
|
|
41K4629 LiftMaster
Protector System Interface Box |
|
|
- Replacement Interface Box.
- Used with CPS Protector Systems.
- Included with CPS Protector System
- shown above.
- For use on LiftMaster and Link
commercial door operators only.
|
|
|
|
|
41A6569 LiftMaster
Chamberlain Sears Craftsman Safety Sensor Brackets |
|
|
- For use with 41A4373A older
style safety sensors that had a bolt hole right through the center
of sensors.
- For CPS and CPS-U sensors - shown
above.
- Includes 1 pair of brackets and
fasteners.
|
|
