| BRIDGED WIRE CODING INSTRUCTIONS
1.Put all
switches on the NEW TRANSMITTER in the OPEN position
2. Old Transmitter wires are equivalent to 2 (wire 1), 4(wire 2), 6 (wire
3), 8 (wire 4), 10 (wire 5).
3. Wires NOT cut take matching rocker
switches, push in opposite position.
EXAMPLE: Wire 6 is cut 2 4
6 8 10. Put all
rockers in OPEN position and then put 2, 4, 8, 10 in the DOWN position.
4. If the doesn't work - Reverse all switches (open ones to close
and closed one to open).
5. If you have a NINE
switch remote the number 10 switch on the new remote needs to be in the
OPEN position
|
